Customization: | Available |
---|---|
Standard: | AISI, API, AISI, GB |
Length: | Taper-length |
Still deciding? Get samples of US$ 2000/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Production Name :
PDC Drill bit , PDC Bit ,Diamond PDC Bit , PDC Diamond Bit ,Rock Drill Bit , Drilling Rig Bit ,Diamond Drill Bit ,Well Drilling Bit , Drilling Rod Bit
Mining Drill Bit ,water Drill Bit ,oil Drill Bit ,underground mining Drill Bit
Diamond Drill tool ,Drilling Rig Tool ,
Matrix body PDC bits are primarily used for these application
---Drilling in shale formations
---Soft limestone sites
---Fast drilling in the stratum
---Natural gas drilling
---Deep wells
---Abrasive formations
PDC Bit difference of Tricone Bit :
Designed for higher ROP in drilling deep and medium-hard rocks,PDC drill bits always drills from ground to bottom directly without changing another drill bit, it will save huge drilling and laobur cost.
Different from tricone bits, the PDC drill bits need lower WOB but higher RPM,so it always works with mud motor to get high rotating speed.
Quality of PDC drill bits mainly depends on quality of PDC cutters,we provide unique solution according to specific requirement and detailed geological information.
API | ISO | ASM | NACE |
API Spec 7-1 | ISO 9001 | ASME B94. ASME B94.11M | NACE |
Composition | C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cu(%) | Cr(%) | V(%) | Mo(%) | Al(%) | Ti(%) |
SAE4145HS | 45 | 26 | 110 | 2 | 2 | 1 | 115 | 0.9 | 32 | 2 | 4.2 |
6-1/2" Steel Body PDC Bit Specification IADC:S333
|
|
Bit Diameter
|
6 1/2"=165.1mm
|
Type Mode
|
S616
|
Cutter Sizes
|
16/13 mm
|
Nozzles Qty
|
3NZ
|
Gauge Length
|
2.0"
|
Connection
|
API Reg. 4 1/2"
|
Gross Weight
|
17 Kgs
|
Operating Parameters
|
|
Rotary Speed
|
60-260 RPM
|
Weight on Bit
|
9-67 KN
|
Max. WOB
|
67 KN
|
Flow Rate
|
57-76 lps
|
Formation
|
Soft to Medium hard formation with low compressive strength interbedded with hard layers.Rock type such as Clay stone,Marl,Lignite,Sandstone,Tuff.
|
F.A.Q |