Customization: | Available |
---|---|
After-sales Service: | According to Drill Bit Usage |
Warranty: | According to Drill Bit Usage |
Still deciding? Get samples of US$ 1000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Production Specification | |||
IADC | 117 | ||
Bearing Type | Rubber Jounary Bearing | ||
Circulation Type | Water | ||
Cutting Structure | Inner & Nose Rows : | ||
Gage Rows | Milled Tooth | ||
Pin Connection : | 6-5/8" | ||
Metric Bit Diameter | 269.9mm | ||
Product Weight | 99kgs | ||
Operation Recommendations | |||
Weight On Bit (Ton): | 20-35 | ||
Rotation Speed (Rotary): | 60-90rpm | ||
Make Up Toqure(klb.ft): | 28-32 |
IADC | WOB(kN/mm) | RPM (r/min) | Suitable formation |
417 | 0.35~0.90 | 140~70 | Very soft with low compressive strength and high drillability,such as shale,clay,sandstone and conglomerate,etc. |
437 | 0.35~0.95 | 140~60 | Very soft with low compressive strength and high drillability,such as shale,clay,sandstone and conglomerate,etc. |
517 | 0.35~1.05 | 120~50 | Soft with low compressive strength and high drillability,such as shale,clay,sandstone and soft limestone,etc. |
537 | 0.35~1.05 | 110~40 | Medium soft with low compressive strength and harder abrasive stringers,such as hard shale,hard gypsolyte,soft limestone,sandstone |
and dolomite with stringers,etc. | |||
617 | 0.35~1.05 | 80~40 | Medium hard with high compressive strength and thick&hard stringers,such as hard shale,limestone, sandstone and dolomite,etc. |
637 | 0.70~1.20 | 70~40 | Medium hard with high compressive strength and high abrasiveness,such as limestone,dolomite, sandstone and chert.ect. |
Note:The upper limits of WOB and RPM in above table should not be used simultaneously. |