Customization: | Available |
---|---|
After-sales Service: | According to Drill Bit Usage |
Warranty: | According to Drill Bit Usage |
Still deciding? Get samples of US$ 800/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
IADC | WOB(kN/mm) | RPM (r/min) | Suitable formation |
417 | 0.35~0.90 | 140~70 | Very soft with low compressive strength and high drillability,such as shale,clay,sandstone and conglomerate,etc. |
437 | 0.35~0.95 | 140~60 | Very soft with low compressive strength and high drillability,such as shale,clay,sandstone and conglomerate,etc. |
517 | 0.35~1.05 | 120~50 | Soft with low compressive strength and high drillability,such as shale,clay,sandstone and soft limestone,etc. |
537 | 0.35~1.05 | 110~40 | Medium soft with low compressive strength and harder abrasive stringers,such as hard shale,hard gypsolyte,soft limestone,sandstone |
and dolomite with stringers,etc. | |||
617 | 0.35~1.05 | 80~40 | Medium hard with high compressive strength and thick&hard stringers,such as hard shale,limestone, sandstone and dolomite,etc. |
637 | 0.70~1.20 | 70~40 | Medium hard with high compressive strength and high abrasiveness,such as limestone,dolomite, sandstone and chert.ect. |
Note:The upper limits of WOB and RPM in above table should not be used simultaneously. |
Production Specification | |||
IADC | 637 | ||
Bearing Type | Jounary Bearing | ||
Circulation Type | Water | ||
Cutting Structure | Inner & Nose Rows : Spherical | ||
Gage Rows | Chisel | ||
Pin Connection | 6-5/8" | ||
Metric Bit Diameter | 311.1mm | ||
Product Weight | 98kgs | ||
Operation Recommendations | |||
Weight On Bit (klbs): | 49-84 | ||
Rotation Speed (Rotary): | 90-40rpm | ||
Make Up Toqure(klb.ft): | 50.3-57.5 | ||
Cutter Structure | |||
Spherical on gage ,double spherical on inner rows , | |||
Designed fo higher compressive strength | |||
Medium to hard formations with interlayers | |||
Compressive strength: 29000-38000 Psi /200-262 Mpa |
API | ISO | ASM | NACE |
API Spec 7-1 | ISO 9001 | ASME B94.55M ASME B94.11M | NACE |
Composition | C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cu(%) | Cr(%) | V(%) | Mo(%) | Al(%) | Ti(%) |
SAE4145HS | 45 | 26 | 110 | 2 | 2 | 1 | 115 | 0.9 | 32 | 2 | 4.2 |